Tough, high-grip stone finish
Resin Bonded Surfacing
A rugged, textured stone finish with serious grip — ideal where traction and durability matter most. Resin bonded scatters natural aggregate onto a resin layer for a hard-wearing, anti-slip surface on driveways, footpaths, ramps and car parks.
What you get
What resin bonded surfacing does best
Resin bonded broadcasts loose stone onto a resin-coated base, leaving the aggregate slightly proud. That gives a coarser, higher-grip surface than resin bound — the right choice when traction is the priority.
High-traction texture
The exposed aggregate creates a naturally coarse, anti-slip surface that holds grip in wet and icy conditions — ideal for ramps, slopes and busy footpaths.
Hard-wearing under traffic
A tightly bonded stone layer stands up to vehicles, foot traffic and turning loads without rutting, making it a dependable commercial and domestic finish.
Quick to lay over sound bases
Bonded systems apply directly onto sound concrete or tarmac with minimal build-up, so installation is fast and disruption is low.
UV-stable colour
The resin is UV-resistant, so the decorative aggregate keeps its colour rather than yellowing or dulling over time.
Decorative aggregate choice
A wide range of natural stone colours lets you match the surface to the property while keeping the practical, textured finish.
Correctly drained, fully compliant
Resin bonded is a non-permeable surface, so we plan drainage to a soakaway or permeable area — keeping the installation compliant and free of standing water.
alt: Resin Bonded Surfacing — finished project
alt: resin bound surface detail — close-up
Why choose us
Bonded is about grip and wear — specified for the job, not the brochure
Resin bonded and resin bound are not the same surface, and they shouldn’t be quoted as if they were. Bonded gives you a coarser, higher-grip, non-permeable finish; bound gives a smooth, permeable one. We recommend bonded only where its grip and durability genuinely suit the surface — and we tell you plainly which system your quote covers.
Where you’d prefer a smooth, permeable finish instead of a coarse one, our resin bound driveways are the alternative to consider.
Because bonded surfaces are non-permeable, drainage is part of the design rather than an afterthought. We plan falls and outfalls so water is directed away cleanly to a soakaway or permeable area, which keeps the installation compliant and the surface free of pooling.
Grip comes from aggregate choice and a properly keyed base. We prepare the substrate so the resin bonds tightly, then broadcast the stone evenly — the difference between a surface that holds its texture for years and one that sheds stone within months.
You get a fixed, itemised quote with the cost per m² shown, and a 10-year written guarantee on workmanship and materials.
Built for grip and hard use
- Fixed written quote with cost per m² shown up front
- Ground preparation and edging included — not bolted on later
- High-traction, anti-slip finish that holds grip when wet
- Drainage planned correctly for a non-permeable surface
- 10-year written guarantee on workmanship and materials
Resin bonded is the right choice when…
- Grip is the priorityOn ramps, slopes, steps and busy walkways, the coarse texture of a bonded surface gives traction that a smooth surface can’t match.
- The surface takes heavy or turning trafficBonded stone holds up to vehicle loads and constant foot traffic without rutting or loosening.
- You want a fast overlay on a sound baseBonded systems lay quickly over solid concrete or tarmac with minimal build-up and disruption.
- You like the look of natural stone with extra gripYou keep the decorative aggregate appearance while gaining a higher-friction, safer surface.
- Permeability isn't requiredWhere SUDS permeability isn’t needed, bonded gives durability and grip with drainage planned in separately.
Work process
How we install resin bonded surfacing
A disciplined sequence that keys the base, bonds the resin and locks the aggregate in place for a surface that holds its grip and colour.
Survey and design
We assess the base, traffic and grip requirements, plan drainage for the non-permeable surface and help you choose the aggregate.
Base preparation
We clean, repair and key the existing concrete or tarmac so the resin bonds tightly to a sound, stable substrate.
Edging and drainage
We detail edges and set up drainage falls to a soakaway or permeable area, since bonded surfaces don’t drain through themselves.
Resin application
We apply the UV-stable resin layer evenly across the prepared, keyed base ready to receive the aggregate.
Aggregate broadcast
Natural stone is broadcast onto the wet resin and left slightly proud, creating the coarse, high-grip bonded texture.
Cure, sweep and handover
The surface cures, we remove loose excess stone, inspect grip and edges, clear waste and hand over a tidy, ready-to-use surface.
Materials
Trusted, industry-recognised systems
We only specify UV-stable resin and graded aggregate from
established suppliers, because the quality of the materials decides how well the surface
drains, holds colour and lasts.
FAQs
Resin bonded surfacing questions
What's the difference between resin bonded and resin bound?
Resin bonded scatters loose stone onto a resin layer, leaving a coarse, high-grip, non-permeable finish. Resin bound mixes the stone through the resin and trowels it to a smooth, permeable finish. Bonded is chosen for grip and durability; bound for a smoother, draining surface. We confirm which system your quote covers.
Is resin bonded SUDS-compliant?
No — bonded surfaces are non-permeable, so they don’t drain through the surface. Where permeability or SUDS compliance is needed, resin bound is the system to use. For bonded, we plan separate drainage to keep the installation compliant.
Is it more slip-resistant than resin bound?
Generally yes. The exposed, slightly proud aggregate gives a coarser texture and higher friction, which is why bonded is favoured for ramps, slopes and busy footpaths.
Can it be laid over my existing driveway?
Often yes, if the concrete or tarmac is sound. Bonded applies with minimal build-up, so it’s a quick way to refresh a solid but tired surface. If the base has failed we’ll tell you honestly.
Will the stone come loose?
Not when it’s installed correctly. A properly keyed base, the right resin coverage and even aggregate broadcast lock the stone in place. Loose stone usually points to a rushed install — which is exactly what our process avoids.
Rated by homeowners across southern England
Add your verified Google reviews here. (Placeholder left intentionally —
real testimonials only, no invented reviews.)
Explore this section
Resin Bonded Surfacing services
Explore the individual services in this section.
Anti-Slip Resin Bonded Surfacing
When grip is non-negotiable — ramps, steps, steep slopes and constantly wet areas — anti-slip resin bonded surfacing delivers high friction that…
Resin Bonded Car Park Surfacing
A durable, high-grip surface that keeps a car park safe, smart and open for business. Resin bonded lays fast over a sound base and stands up to…
Resin Bonded Driveway Installation
A rugged, high-grip driveway with the look of natural stone and the toughness to take daily traffic. Resin bonded gives a coarse, anti-slip finish —…
Resin Bonded Footpath Installation
Safe, high-grip footpaths that stand up to constant foot traffic. Resin bonded gives a coarse, anti-slip finish ideal for domestic paths, commercial…
Need a high-grip, hard-wearing surface?
Tell us where grip and durability matter most and we’ll confirm whether bonded is the right system, with a fixed written quote and no obligation.