Pool surrounds & poolside
Resin Bound Pool Surround Installation
A smooth, slip-resistant poolside surface that drains splash water instantly and stays comfortable underfoot. Seamless, permeable and weed-free — backed by a 10-year written guarantee.
What you get
A poolside surface built for bare feet and splash water
A pool surround has to do things ordinary surfacing doesn’t — shed water fast, keep grip when wet and stay comfortable underfoot. Resin bound handles all three.
Slip-resistant when wet
The textured aggregate finish keeps grip around a pool, where surfaces are wet constantly. Extra anti-slip aggregate can be specified for added traction.
Drains splash water fast
The permeable surface lets splash-out drain straight through instead of forming slippery puddles around the pool edge.
Comfortable underfoot
A smooth, seamless finish is kind to bare feet — no sharp joints, loose stones or rocking slabs at the poolside.
Seamless around curves
Trowel-applied resin bound shapes cleanly around curved pool edges, steps and coping for a tidy, continuous border.
Weed-free and low-maintenance
No open joints means no weeds and no jointing sand washing into the pool. A sweep and a rinse keeps it clean.
Colour to suit the setting
Choose a blend that complements the pool, paving and planting for a cohesive, high-end poolside.
alt: Resin Bound Pool Surround Installation — finished project
alt: resin bound surface detail — close-up
Why choose us
Poolsides are the hardest test of a resin surface — and we build for it
Constant wetting, splash-out and bare-foot traffic make a pool surround unforgiving. The two things that matter most are drainage and grip, and both depend on getting the base falls and the surface texture right. We specify and build for poolside conditions rather than treating it like an ordinary patio.
Part of our resin bound surfacing service — see the full range and how it fits together.
We set the base and falls so splash water drains away from the pool and through the surface quickly, keeping the poolside clear and safe rather than slick.
Around curved coping, steps and the pool edge, neat detailing is what makes a surround look finished. Trowelled resin bound lets us shape these transitions cleanly so the border follows the pool precisely.
You receive a fixed, itemised quote with the cost per m² shown, and the surround is covered by our 10-year written guarantee on workmanship and materials.
Clear pricing, no surprises
- Fixed written quote with cost per m² shown up front
- Ground preparation, edging and drainage included — not bolted on later
- Fully bound, permeable surface with no loose stones
- SUDS-compliant build, so most installs need no planning permission
- 10-year written guarantee on workmanship and materials
Resin bound suits your pool surround if…
- The current surround gets slipperyA textured, anti-slip resin surface keeps grip exactly where wet conditions are constant.
- Water pools at the pool edgeA permeable surface drains splash-out fast, removing the puddles that make a poolside hazardous.
- Loose stones or lifting slabs bother bare feetA seamless bound surface is smooth and continuous, with nothing loose or raised underfoot.
- Weeds and jointing sand are a nuisanceNo joints means no weeds and no sand washing into the pool.
- You want a poolside that looks high-endA bespoke aggregate blend and clean detailing lift the whole pool area.
Work process
How we install your pool surround
Our standard bound-surfacing sequence, set up specifically for poolside drainage, grip and clean edge detailing.
Survey and design
We assess the poolside, levels and drainage, discuss grip and colour, and specify a surface built for wet, bare-foot use.
Base preparation
We prepare or repair the base with falls that move splash water away from the pool and through the surface.
Edging and coping detail
We contain the perimeter and detail cleanly around coping, steps and the pool edge for tidy, durable transitions.
Mix and trowel
Resin and anti-slip aggregate are mixed at the correct ratio and trowelled to a smooth, grippy poolside finish.
Cure and inspect
The surface cures in around 24 hours. We check grip, drainage, edges and finish before handover.
Tidy handover
We clear all waste, leave the pool area tidy and explain simple ongoing care.
Materials
Trusted, industry-recognised systems
We only specify UV-stable resin and graded aggregate from
established suppliers, because the quality of the materials decides how well the surface
drains, holds colour and lasts.
FAQs
Resin bound pool surround questions
Is a resin pool surround slippery?
No — the textured aggregate finish is slip-resistant, and we specify additional anti-slip aggregate for poolside use where the surface is wet constantly.
Will splash water drain away?
Yes. The permeable surface, combined with correct base falls, drains splash-out through the surface quickly so the poolside doesn’t hold puddles.
Can you surface around a curved or irregular pool?
Yes. Trowel-applied resin bound shapes cleanly around curves, steps and coping, which is one of its advantages over rigid slabs.
Does it stay comfortable for bare feet?
The seamless finish has no sharp joints or loose stones. Lighter aggregate blends also tend to stay cooler underfoot in direct sun.
How do I maintain it?
Sweep and rinse as needed, with an occasional light pressure wash. There’s no weeding or jointing sand to worry about.
Rated by homeowners across southern England
Add your verified Google reviews here. (Placeholder left intentionally —
real testimonials only, no invented reviews.)
Plan your resin bound pool surround
Book a free survey. We’ll specify grip and drainage for poolside use and send a fixed written quote with no obligation.